Prevent Sagging Bookshelves When You Design Them.

I was at a friend’s house the other day and noticed that in his den, the shelves in all of his bookcases were sagging. This was certainly due to the weight of the books on the shelves but also because all of the shelves were made from ¾” material. Years ago, we had found the same problem and we made the call to switch all of our weight-bearing shelves to 1” material.

Sometimes things cost a little more. The incremental cost between the two thicknesses of material is so small but the difference in having sagging bookshelves or not is tremendous.

Another aesthetic issue is the appearance of the edge.  We often give it a substantial appearance by finishing the edge with an additional trim piece such as a one and a half inch tall molding detail.  We apply in on the front edge.  That gives the shelf a very substantial appearance.

Bloomfield Hills Library

Bloomfield Hills Library

Ken Peterson, Hunter Roberts Homes, Bloomfield Hills, MI

Hunter Roberts Homes and Wellington Chase Homes are related design/build businesses doing new residential design build and renovation design build in Michigan.  We operate primarily in the Oakland County cities, townships and villages of Birmingham, Bloomfield Village, Bloomfield Hills, Bloomfield Township, Franklin, Sylvan Lake, Beverly Hills, Orchard Lake, Bingham Farms, Huntington Woods, Pleasant Ridge, Royal Oak, Berkley, Ferndale and  Troy

Be Sociable, Share!

Leave a Reply

You must be logged in to post a comment.